Sonel PAT-86 Portable Appliance Tester
Brand: Sonel
View Details
Quantity: In Stock
Selected variant:
Selected variant:
INDEX CAT. WMGBPAT86
EAN 5907624031050
Ingress protection: IP 67
Measurement category: CAT II 300 V
Data transmission: LAN, USB, Wi-Fi
Display: touchscreen, graphic, color, backlit
Description
Safety of welding machines outright
Ensure safe use of welding and electrical equipment with the Sonel PAT-86 electrical equipment safety meter.
The Sonel PAT-86 advanced meter is perfect for control measurements of welding machines and other electrical devices. The instrument allows to measure parameters having an impact on the safe use of the equipment, such as resistance of protective conductors, insulation resistance, continuity of connections, leakage currents, power, RCD and PRCD. The PAT-86 model is especially dedicated to testing welding equipment according to the EN 60974-4 standard. It allows, among other things, to check the rated voltage of welding equipment in no-load condition, the welding circuit leakage current and the primary leakage current.
The Sonel PAT-86 electrical equipment safety meter will come in handy in those areas where safety is of particular importance. Reliable wherever welders, power tools, three-phase appliances or domestic appliances need to be inspected.
Features
- Extensive measuring system enables:
- measurement of welding equipment parameters:
- rated voltage of welding devices in no-load condition,
- welding circuit leakage current,
- primary leakage current,
- protective conductor resistance measurement,
- residual voltage measurement,
- measurement of insulation resistance in three points,
- measurement of substitute, differential and touch leakage current,
- functional test,
- test of RCD and PRCD switches,
- ...and much more.
- measurement of welding equipment parameters:
- Intuitive user interface.
- Cooperation with a label printer and QR code scanner.
- Robust, compact housing.
- Operation time at rechargeable battery power supply: up to 1 hour.
Application
PAT-86 is used wherever safety is the most important thing. Ideally suited to situations where it is necessary to check welders, power tools, three-phase devices and household appliances.
Welders
PAT-86 was created for testing welding equipment in compliance with EN 60974-4 standard.
Capabilities
Thanks to the extensive measuring part, PAT-86 enables comprehensive checking of electrical devices. The touch screen and autoprocedures section make testing quick and efficient.
The meter cooperates with a label printer and QR scanner, which greatly facilitates the recordkeeping of tools. The following printouts are available:
- initial measurement report,
- QR code, where information on performed tests and the parameters of the tested device are saved. These data can be read and added to the meter memory using the optional QR code scanner.
The whole picture is complemented by a compact and durable housing. It provides instrument protection during both measurements and transport.
Memory
The memory has a tree structure. For each device tested it contains its description, location of measurements, customer data and registration number.
Communication
The meter provides many modes of transmission of measurement results: via USB, LAN and WiFi. In addition, it is possible to upload the results to a USB stick.
Dedicated PAT Analysis software allows for data management and also reports preparation - in several versions, depending on the user’s needs. In addition, it is possible to use the PAT Server solution. This system allows you to work in many modes, including:
- smooth data management,
- online upload to server,
- work through a web browser,
- work in task ordering mode,
- storing copies of data on the server.
Standards
The tester can be used to test the equipment performance in accordance with standards:
- EN 50678:2020 General requirements for safety testing of electrical equipment after repair.
- EN 50699:2021 Recurrent tests of electrical equipment.
- EN 60745-1 Hand-held motor-operated electric tools. Safety. Part 1: General requirements.
- EN 61029 Safety of transportable motor-operated electric tools. General requirements.
- EN 60335-1 Household and similar electrical appliances. Safety. General requirements.
- EN 60950 Safety of information technology equipment.
- EN 61557-6 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems.
- VDE 0404-1 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 1: Allgemeine Anforderungen.
- VDE 0404-2 Prüf- und Messeinrichtungen zum Prüfen der elektrischen Sicherheit von elektrischen Geräten. Teil 2: Prüfeinrichtungen für Prüfungen nach Instandsetzung, Änderung oder für Wiederholungsprüfungen.
- VDE 0701-0702 Prüfung nach Instandsetzung, Änderung elektrischer Geräte. Wiederholungsprüfung elektrischer Geräte. Allgemeine Anforderungen für die elektrische Sicherheit.
- AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment.
Technical data
Measurement functions | Range | Resolution | Accuracy |
---|---|---|---|
Resistance of protective conductor (PE) I = 200 mA / 10 A / 25 A |
up to 19.99 Ω | from 1 mΩ | from ±(3% m.v. + 4 digits) |
Insulation resistance UISO = 100 V / 250 V / 500 V / 1000 V |
up to 599.9 MΩ | from 1 kΩ | ±(5% m.v. + 8 digits) |
Current (clamp measurement) | up to 24.9 A | from 1 mA | ±(5% m.v. + 5 digits) |
Visual test | ✓ | ||
Continuity check of protective conductor (PE) | ✓ | ||
Insulation resistance measurement at three points | ✓ | ||
IEC cable test | ✓ | ||
Functional test | |||
Apparent power S | up to 3.99 kVA | from 1 VA | ±(5% m.v. + 3 digits) |
Active power P | up to 3.99 kW | from 1 W | ±(5% m.v. + 3 digits) |
Reactive power Q | up to 3.99 kvar | from 1 var | ±(5% m.v. + 3 digits) |
Power Factor (PF) | up to 1.00 | 0.01 | ±(10% m.v. + 5 digits) |
Current consumption for power measurement | up to 15.99 A | 0.01 A | ±(2% m.v. + 3 digits) |
THD for voltage and current | up to 99.9% | 0.1% | ±(5% m.v. + 5 digits) |
cosφ | up to 1.0 | 0.1 | ±(5% m.v. + 5 digits) |
Voltage measurement for welding machines | |||
RMS voltage URMS | up to 170.0 V | 0.1 V | ±(2.5% m.v. + 5 digits) |
DC and AC peak voltage | up to 240.0 V | 0.1 V | ±(2.5% m.v. + 5 digits) |
Voltage U0 | up to 240.0 V | 0.1 V | ±(2.5% m.v. + 5 digits) |
Leakage current measurement | |||
Welding circuit leakage current IL | up to 14.99 mA | 0.01 mA | ±(5% m.v. + 2 digits) |
Leakage current of the welding machine’s primary circuit IP | up to 14.99 mA | 0.01 mA | ±(5% m.v. + 5 digits) |
PE leakage current and differential leakage current | up to 19.9 mA | 0.01 mA | ±(5% m.v. + 2 digits) |
Substitute leakage current | up to 19.9 mA | 0.01 mA | ±(5% m.v. + 2 digits) |
Touch leakage current | up to 4.999 mA | 0.001 mA | ±(5% m.v. + 3 digits) |
RCD and PRCD switch test | |||
Measurement of RCD parameters according to IEC 61557 | up to 300 ms | 1 ms | ±(2% m.v. + 2 digits) |
Measurement of RCD tripping current IA for sinusoidal residual current (AC type) | up to 30 mA | 0.1 mA | ±5% IΔn |
Measurement of power network parameters | |||
Voltage | up to 265.0 V | 0.1 V | ±(2% m.v. + 2 digits) |
Frequency | up to 55.0 Hz | 0.1 Hz | ±(2% m.v. + 2 digits) |
m.v. – measured value
Weight and dimensions
Parameter | Value |
---|---|
Net weight (kg) | 5 |
Package weight (kg) | 7.7 |
Package width (cm) | 40.5 |
Package height (cm) | 25 |
Package length (cm) | 30.5 |
Specifications